Warriorsway Community Link
✅Day 1- Introduction to Embedded System and Choosing the Right Processor
✅DAY – 2 Understanding Microcontroller programming
✅DAY – 3 IDE Installation and Creating a Project in STM32CUBEIDE
✅DAY – 4 Embedded Code Debugging Tips and tricks
✅DAY – 5 Understanding MCU Memory Map ,MCU Bus Interface and MCU Clock
✅DAY – 6 LED Blinking using Memory Map
✅Day -7 Understanding MCU Vector Table and Interrupt Design
✅Day 8- Understanding GPIO and GPIO Registers
✅Day 9-Updating MCU Specific header file with Bus domain and Peripheral details
✅DAY – 10 Structuring Peripheral Registers ,Writing Clock Enable and Disable Macros
✅DAY – 11 Writing GPIO Driver API
✅DAY – 12 Writing GPIO Driver API -Part 2
✅DAY – 13 GPIO Interrupts -Part 1
✅DAY – 14 GPIO Interrupts -Part 2
✅DAY – 15 System Tick Timers
✅DAY – 16 SPI Introduction
✅DAY – 17 Writing SPI Driver -Part 1
✅DAY – 18 Writing SPI Driver -Part 2
✅DAY – 19 Writing SPI Driver -Part 3
✅DAY – 20 Understanding SPI Transmit
✅DAY – 21 Writing SPI Driver -Part 4
✅DAY – 22 Writing SPI Driver -Part 5
✅DAY – 23 SPI Interrupts
✅DAY – 24 I2C Introduction
✅DAY – 25 I2C Driver -Part 1
✅DAY – 26 I2C Driver -Part 2
✅DAY – 27 I2C Driver -Part 3
✅DAY – 28 I2C Driver -Part 4
✅DAY – 29 UART Driver -Part 1
✅DAY – 30 UART Driver -Part 2
